ADWIN Systems

ADWIN Light-16

ADWIN Gold II

ADWIN Pro II

Enclosures
Processor
Multi I/O Modules
Analogue Modules
Digital Modules
Counter Modules
System Bus Modules
Temperature Modules

ADWIN PRO II Analog System Modules


Interfaces for analog signals

 

The analog modules for ADwin-Pro II systems are the best solution for time-critical tasks. The analog inputs have a resolution of up to 18 bit and offer sample rates up to 50 MHz. 256 MB of data memory is available for temporary data storage on modules with parallel analog inputs. The processor T11 accesses the measurement values of the ADC modules via the ADwin-Pro II bus with up to 200 MB/s.

 

Analog input modules

 

· Multiplexed inputs

. 16 differential or 32 single-ended channels

. ADC's with a resolution of 18 bit; conversion time 2 µs

. Multiplexer settling time 2 µs

. optional with TiCo processor

 

· Parallel analog inputs

. one ADC per channel for synchronous sampling

. 4 or 8 differential channels

. resolution 14, 16 or 18 bit

à 14 bit: conversion time 0.025 µs

à 16 bit: conversion time 0.25 µs

à 18 bit: conversion time 2.0 µs

 

. On-board memory 256 MB RAM

. Build-in edge detection for comparator purposes

. 16 bit module: optional mean value calculation from a defined number of measurement values

 

Analog output modules

The analog output modules allow synchronous data output on 4 or 8 channels without time offset. The DACs have a resolution of 16 bit and and offer a large band with.

· Pro II AOut-4/16, Pro II AOut-8/16

. 4 or 8 channels

. 16 bit resolution

. Settling time 3 µs

. Data output 10 times faster than on Pro I modules

  Analog Input Modules, multiplexed

Pro-II-AIn-8/188 diff. analog inputs, 18-bit ADC, 2µs conversion time, MUX 2µs, block measurement, limit monitoring, 1pin LEMO socket
Pro-II-AIn-8/18-L28 diff. analog inputs, 18-bit ADC, 2µs conversion time, MUX 2µs, block measurement, limit monitoring, 2pin LEMO socket
Pro-II-AIn-16/18-C32 single ended or 16 diff. current inputs 0..20mA, 500W Shunt (0,05%, TK10), 18-bit ADC, 2µs conversion time, MUX 2µs, block measurement, limit monitoring, D-SUB socket
Pro-II-AIn-32/18-D32 single ended or 16 diff. analog inputs, 18-bit ADC, 2µs conversion time, MUX 2µs, block measurement, limit monitoring, D-SUB socket, isolated by optocouples
Pro-II-AIn-8/18-8B8 analog voltage inputs +/- 10V, 8 analog voltage inputs for 8B signal conditioning modules, 18-bit ADC, 2µs conversion time, block measurement, limit monitoring, D-SUB socket, 15 HP
Pro-II-AIn-16/18-8B16 analog voltage inputs for 8B signal conditioning modules, 18-bit ADC, 2µs conversion time, block measurement, limit monitoring, D-SUB socket, 15 HP
Pro II-Ain-32/18-D-TiCo32 single ended or 16 diff. analog inputs, 18-bit ADC, 2µs conversion time, MUX 2µs, block measurement, limit monitoring, D-SUB socket isolated by optocouples, (TiCo)

  Analog Input Modules, Parallel Acquisition

Pro-II-AIn-F4/144 analog diff. inputs, 4x 14-bit ADC, 4x50MHz, 256MB RAM averaging, limit monitoring, 1pin LEMO socket
Pro-II-AIn-F4/14-L24 analog diff. inputs, 4x 14-bit ADC, 4x50MHz, 256MB RAM averaging, limit monitoring, 2pin LEMO socket
Pro-II-AIn-F4/14-D4 analog diff. inputs, 4x 14-bit ADC, 4x50MHz, 256MB RAM, averaging, limit monitoring, D-SUB socket
Pro-II-AIn-F4/14-B4 analog diff. inputs, 4x 14-bit ADC, 4x50MHz, 256MB RAM, averaging, limit monitoring, BNC socket
Pro-II-AIn-F8/148 analog diff. inputs, 8x 14-bit ADC, 4x50MHz, 8x25MHz, 256MB RAM averaging, limit monitoring, 1pin LEMO socket, 10 HP
Pro-II-AIn-F8/14-L28 analog diff. inputs, 8x 14-bit ADC, 4x50MHz, 8x25MHz, 256MB RAM, averaging, limit monitoring, 2pin LEMO socket, 10 HP
Pro-II-AIn-F8/14-D8 analog diff. inputs, 8x 14-bit ADC, 4x50MHz, 8x25MHz, 256MB RAM, averaging, limit monitoring, D-SUB socket, 10 HP
Pro-II-AIn-F8/14-B8 analog diff. inputs, 8x 14-bit ADC, 4x50MHz, 8x25MHz, 256MB RAM, averaging, limit monitoring, BNC socket, 10 HP