ADWIN Systems

ADWIN Light-16

ADWIN Gold II

ADWIN Pro II

Enclosures
Processor
Multi I/O Modules
Analogue Modules
Digital Modules
Counter Modules
System Bus Modules
Temperature Modules

ADWIN PRO II I-O Modules


All-rounder with A/D, D/A, counters, SSI and EtherCAT

 

The multi I/O modules for ADwin-Pro II are the autonomous all-rounders for any type of signals: The module combines the fast reacting TiCo processor with analog and digital I/Os. On this basis, the intelligent slide-in card can react independently to measurement values and events and disburden the main processor, for example performing as fast closed-loop controller, digital filter for analog signals, function generator or intelligent limit monitor.

There are even more possibilities using the extended version, e. g. : counter, SSI decoder or EtherCAT interface.

 

· General

. TiCo processor

. 128 kB internal memory

. 4 MB external SRAM

. 37-pole Sub-D plug

 

· Analog inputs

. 8 differential or 16 single-ended channels

. ADC resolution 18 bit; conversion time 2 µs

. Multiplexer settling time 2 µs

 

· Analog outputs

. 4 channels

. DAC resolution 16 bit

. Settling time 9 µs

 

· Digital channels

. 8 channels with TTL logic

. configurable as inputs or outputs in groups of 4

 

· Extension MIO-4-ET1 (ordering option)

. 4 transistor outputs

. 4 optically isolated iinputs

. 1 counter block with two 32 bit counters: a forward/backward counter and a counter for PWM analysis

. 1 SSI decoder

. 1 EtherCAT interface (slave)

 

 

Multi I/O Modules

Pro-II-MIO-416 s.e. or 8 diff. analog inputs, 18-bit ADC, 2µs conversion time, MUX 5µs, 4 analog outputs, 16-bit DAC, 9µs conversion time, 8 TTL-I/Os configurable in groups of 4, TiCo 128 KB int./4MB ext. RAM, D-SUB socket
Pro-II-MIO-4-ET116 s.e. or 8 diff. analog inputs, 18-bit ADC, 2µs conversion time, MUX 5µs, 4 analog outputs, 16-bit DAC, 9µs conversion time, 8 TTL-I/Os configurable in groups of 4, TiCo 128KB int. /4MB ext. SRAM, D-SUB socket, 4x transistor outputs, isolated by optocouplers, max. 200 mA per channel, 4x optically isolated inputs, input voltage 5V-12 V-24V, common GND, 1x 32-bit counter (RS422) up / down counter with clock / direction or 4-edge evaluation, impulse measurement and simultaneous period width measurement, 1x SSI decoder, 1x EtherCAT slave, 10 HP