TYPE |
MASTER PCI CPU FOR REAL TIME SYSTEMS |
| LOCAL RESOURCES |
| - 486DX5 @ 133MHz, under 3.45V |
| - 4Mb flash code |
| - Flash boot 512Kb |
| - EDO DRAM – 32Mb, 0 wait state |
| - Shared EDO DRAM – 16Mb |
| - Interrupt controler (16) (8259) |
| - 1 serial link RS232D (Z85230 at 16MHz) |
| - 1 serial link RS485/RS422 (Z85230 at 16MHz) |
| - 3 independent 16 bits timers (82C54) |
| - Programmable watch dog |
| - Z8536 |
| = Two independent 8-bit, double-buffered, bidirectional I/O ports plus a 4-bit special-purpose I/O port. I/O ports feature programmable polarity, programmable direction (bit mode), « pulse catchers », and programmable open-drain outputs |
| = Four handshake modes, including 3-wire (like the IEEE-488) |
| = Flexible pattern-recognition logic, programmable as a 16-vector interrupt controller. |
| = Three independent 16-bit counter/timers with up to four external access lines per counter/timer (count input, output, gate and trigger), and three output duty cycles (pulsed, one-shot, and square-wave), programmable as retriggerable or nonretriggerable. |
| - 8 general purpose leds |
| LMC (Local Micro Canal) RESOURCES : 2 modules |
Available types : SCSI, PCM, Inputs/Outputs I/O, Analog Inputs, Analog Outputs, ARINC 429, Bus 1553, Fast HDLC, SSI, FLASH …
|
| INTERFACE |
|
|
PCI 32-bit / master board (AMCC 5933) |
|
Dual-shared EDO DRAM 4Mb |
|
Local bus for I/O cards
|
| DRIVERS |
|
|
Under WINDOWS NT.4, XP and LINUX |
| POWER SUPPLY |
|
- Voltage |
+ 5V / 3A |
| PHYSICAL CHARACTERISTICS |
|
| - Format in mm |
PCI large format |
- Front panel connectors
|
1 x HD44 pins female
|
| ENVIRONMENT |
|
| - Range |
Industrial |
| - Operating temperature |
- 20°C to + 70° C |
| - Storage temperature |
- 25°C to + 85° C |
| - Relative humidity |
90 % (without condensation) |
| EUROPEAN NORMS |
|
| |
EMC - EN 61326 - EN 55011 Class A |
| |
CE Compliance |
| |
ROHS - 2002/95/EC |